A Weber Kettle runs for decades when you take care of it, but the grates, fuel accessories, and wheels take the hardest beating. After a few seasons of charcoal burns, rust shows up, hinges stick, and a cracked wheel turns a patio grill into a chore to move. The right replacements restore that classic Weber performance without sending the whole grill to the curb.
A Side-By-Side Look
WEBROIL 7436 Hinged Cooking Grate for Weber 22 Inch Original Kettle Charcoal Grills
Medium BBQ Vortex BGE Kamado Kettle Charcoal Direct Cooking
WEBROIL 7436 Cooking Grate and 7441 Charcoal Grate Kit for Weber 22/22.5 Inch Kettles
WEBROIL Round Replacement Grates Kit for Weber 22 Inch Kettle One-Touch
WEBROIL 65930 65931 Wheel Replacement for Weber Kettle 18/22 Inch
WEBROIL 65930 65931 BBQ Wheels for Weber Kettle 18/22 Inch Replacement Parts
The Strengths Of Each Pick
Grilling on a classic 22-inch Weber means lifting the entire grate every time you want to add charcoal, and that gets old fast. The hinged cooking grate replaces one section of your existing cooking surface with a swing-away panel, so a quick flip opens a direct path to the fuel below. For weeknight cooks who add fresh briquettes halfway through a long burn, this single change removes most of the friction.
It fits the common 22-inch Kettle family: Original Kettle, Premium Performer, Master-Touch, and Bar-B-Kettle models. If you already have a usable grate that’s just missing the hinge convenience, this slots in cleanly. Owners commonly install it in place of one existing grate half, keeping the rest of the original system.
Positive Takeaways
- Mid-cook refueling without lifting the whole grate
- Direct fit across several popular Weber 22-inch Kettle lines
- Also compatible with the Jumbo Joe Premium 18-inch Kettle
- Targets the factory 7436 part slot for straightforward swapping
Things To Consider
- Replaces only half the cooking surface, so you’ll still manage one solid grate panel during cookouts
- Verify your exact Weber model number before ordering to avoid a hinge that doesn’t align with your bowl’s lip
Who It Suits Best
Weekend grillers running an older 22-inch Kettle who want faster refuel access without buying a whole new grate.
Consider Something Else When
The WEBROIL Round Replacement Grates Kit handles a fuller refresh if your existing grate is rusted through, not just missing the hinge.
Most Kettle owners cook by piling charcoal on one side and managing zones by hand, which works until you want restaurant-style sear marks. The Medium Vortex is a stamped steel insert that funnels lit briquettes into a tight cone in the center of your grill, turning the entire cooking grate into one direct-heat surface. That setup shines when you’re running a small cook on a single Weber Kettle.
It’s listed for Kamado cookers, but the Vortex brand specifically markets this style for kettle and other charcoal grills. The medium size lands nicely inside a 22-inch bowl, and it’s made in the USA. For seared wings, smash burgers, or a fast skirt-steak dinner, the Vortex approach is one of the more useful charcoal accessories you can drop in.
Notable Gains
- Concentrates coals for strong direct-heat searing across the whole grate
- Listed for Kamado use, with explicit compatibility notes for kettle grills
- Brand-stamped unit with included trademark label and brochure for authenticity checks
- Medium size fits a 22-inch Weber Kettle without crowding the bowl
- Opens up wing, burger, and steak cookouts without splitting zones by hand
Worth Noting
- It’s an accessory, not charcoal, so you’ll still need quality briquettes or lump to fill it
- The concentrated heat loads more thermal stress on the grate, which can shorten grate life if used on every cook
Quick Facts
Made For
Charcoal cooks chasing fast, even sear marks without splitting the bowl into separate zones.
Skip It When
The WEBROIL 7436 Cooking Grate Kit makes more sense if your real pain point is a worn grate, not heat concentration.
Sometimes one part isn’t the problem. The cooking grate flakes and the charcoal grate below it crumbles at the same time, and patching both is a hassle. This kit bundles the 7436 hinged cooking grate with the 7441 charcoal grate, giving you a top-to-bottom refresh in one box. It’s aimed at the 22 and 22.5-inch One-Touch, Original, Master-Touch, Bar-B-Kettle, and Performer lines.
Compared to the single hinged grate in pick 1, this kit handles the lower charcoal grate too, which catches ash and supports the fuel bed. For a Kettle that’s been through five or six seasons of regular use, replacing both layers at once restores airflow and keeps cookouts predictable.
Good Reasons To Consider
- Covers both the cooking grate and the lower charcoal grate in a single order
- Targets factory part numbers 7436 and 7441 for direct replacement
- Spans a wide range of Weber 22 and 22.5-inch Kettle variants
- Restores airflow under the fuel bed for cleaner burns
Points To Note
- Two-piece installation takes longer than a single-grate swap
- Owners commonly report a quick clean-up of the bowl interior before dropping in the new grates
Best Suited To
Kettle owners dealing with rust on both the cooking and charcoal grates at the same time.
Look Elsewhere When
The WEBROIL Round Replacement Grates Kit is a simpler match if your cooking grate is the only layer that needs work.
The One-Touch cleaning system is one of Weber’s best features, but the grates around it are still regular steel that eventually gives up. This round replacement kit targets the cooking surface specifically, slotting into the One-Touch’s bowl geometry without forcing you to re-fit the cleaning hardware. It’s the swap that keeps an otherwise solid grill going.
It’s compatible with the One-Touch, Original, Master-Touch, Bar-B-Kettle, and Performer series, plus it works alongside the factory 7436 cooking grate and 7441 charcoal grate. For most One-Touch owners, that means a clean install with no surprise gaps. The stainless build is the practical difference from the plain steel factory part.
Notable Upsides
- Direct fit for One-Touch cleaning system geometry
- Stainless steel build offers stronger rust resistance than the original plate
- Works across One-Touch, Original, Master-Touch, Bar-B-Kettle, and Performer lines
- Plays well with the 7436 and 7441 factory replacement parts
Honest Caveats
- Stainless steel holds heat differently than porcelain-coated steel, so first cooks may run a touch cooler until you learn the rhythm
- Surface seasoning builds up over time, and a light scrub after each cook keeps the finish consistent
The Right Fit
One-Touch owners whose original cooking grate has flaked or rusted and who want a direct-shape stainless replacement.
Swap It Out When
Pick up the WEBROIL 7436 Cooking Grate and 7441 Charcoal Grate Kit instead if both grates are shot at the same time.
A Kettle that’s been rolling across a patio for ten years eventually develops a wheel that cracks or falls apart, and suddenly the grill drags instead of glides. The 65930/65931 wheel pair is a two-wheel replacement aimed at the most common Weber Kettle sizes, covering 18-inch and 22-inch bowls across Premium, Original, Master-Touch, and Kettle Cart models.
The kit also crosses over to many other grill brands, so it’s a versatile spare even if your grill isn’t a Weber. For most owners, the install is a cotter pin, a washer, and a wheel swap that takes a few minutes with basic tools. Compared to the heavier-duty pick 6, this one is the lighter, more universal repair option.
A Few Strong Suits
- Two-wheel coverage handles the most common axle-and-wheel failure on a Kettle
- Listed for both 18 and 22-inch Weber Kettle models
- Cross-brand fit across many Weber model numbers and most other grill brands
- Quick swap with basic hand tools for most home setups
Points To Keep In Mind
- Two wheels may not be enough if both axles have failed or the frame has rusted around the hub
- Confirm your specific Weber model number against the compatibility list before ordering
Feature Snapshot
Whose Shelf It Belongs On
Patio grillers who want a lightweight, broad-fit wheel repair without hunting for a model-specific part.
Where Another Pick Suits Better
The WEBROIL 65930 65931 BBQ Wheels are the stronger call for a heavier grill on a rough patio surface.
Some patios are flat concrete, and some are rough pavers or gravel. For the latter, a basic wheel digs in and the grill feels like pushing a wheelbarrow uphill. The 65930/65931 BBQ wheel pair steps up to a six-inch heavy-duty plastic wheel, which delivers smoother rolling and more stable support across uneven outdoor surfaces.
It’s the same broad compatibility as the lighter wheel kit in pick 5, covering 18 and 22-inch Weber Kettles and a wide list of Weber model numbers, plus most other grill brands. The difference shows up in real use: heavier grills roll more confidently, and the larger wheel diameter bridges small cracks and patio seams.
A Favorable Mix
- Six-inch wheel diameter improves roll-over on rough patio surfaces
- Heavy-duty plastic build supports heavier Kettle carts and grills
- Matches the same 18/22-inch Weber Kettle fitment as the lighter kit
- Cross-brand fit for many Weber part numbers and most other grill brands
Factors To Consider
- Larger wheels can change how the grill sits in tight storage spots or under a low cover
- Plastic wheels handle heat from the bowl better than rubber, but parking over hot ash can still mark them over time
Built With In Mind
Grillers who roll their Kettle over pavers, gravel, or cracked concrete and want smoother movement.
Reach For A Different Pick When
Pick 5’s standard wheel kit is the better match for a smaller grill on smooth indoor-style flooring.
What To Weigh Before Choosing Charcoals And Parts For A Weber Kettle
The “charcoal” half of a Weber Kettle conversation splits into two real needs. One is the fuel itself, where the right briquette or lump affects burn time, ash, and flavor. The other is the hardware that holds and shapes that fuel, from the cooking grate down to the wheels that move the grill around the patio. Both deserve attention.
Start with grate compatibility. Weber 22-inch Kettles span several product lines, and grate geometry differs between the One-Touch cleaning system and the Original or Master-Touch bowls. Match the replacement part number, often 7436 for cooking and 7441 for charcoal, against your exact model before ordering.
Then weigh material and heat behavior. Stainless steel holds steady against rust but runs a touch cooler than porcelain-coated steel. Heavier-gauge steel resists warping over years of thermal cycling, which matters on a grill that sees weekly use. For fuel accessories, a stamped steel insert like a Vortex concentrates heat but pushes more thermal stress into the surrounding grate, so use it on cookouts where sear matters more than grate longevity.
Key Considerations Across These Picks
Wrong Turns To Avoid
The classic slip is assuming every 22-inch Kettle uses the same grate. Original, Master-Touch, One-Touch, Performer, and Bar-B-Kettle models each carry specific geometry, and the cleaning system hardware on One-Touch models changes the lip that a grate sits on. Ordering by model number, not just size, prevents a return trip.
Another trap is treating charcoal accessories as universal. A Vortex-sized for a Kamado doesn’t always fit a 22-inch Kettle cleanly, and wheels sold for one grill brand may have a different axle diameter than your Weber. The compatibility lists on each kit are there for a reason, so cross-check before clicking.
Where The Extra Money Goes
Higher-tier parts tend to spend their budget on material thickness and finish quality. A stainless steel grate costs more than a plain steel replacement because the alloy resists rust and survives longer between swaps. Heavy-duty plastic wheels outlast basic wheels on rough surfaces because the hub and tire profile are designed for repeated stress.
For a Kettle that’s already a decade old, that extra spend usually pays off in fewer replacements over the next decade. For a newer grill that rarely leaves the patio, the standard-tier parts are often enough, and the saved money can go toward better charcoal instead.
Frequently Asked Questions
Do I need different charcoal for a Weber Kettle than for any other grill?
No. Weber Kettles burn standard charcoal briquettes and lump fuel the same way most charcoal grills do. The difference is in how you manage the fuel bed, which is why grate and accessory choices matter more than the fuel itself.
How do I know which Weber Kettle model I have?
The model number is stamped on the data label, usually on the lower frame or inside one of the legs. Cross-reference that number with the compatibility list on any replacement part before ordering.
Will a 22-inch grate fit an 18-inch Kettle?
Not directly. The bowls are different diameters, and grate clips are spaced for the matching size. An 18-inch grate in a 22-inch bowl leaves a wide gap, and the reverse doesn’t sit on the bowl rim correctly.
Can I replace just the cooking grate and leave the charcoal grate alone?
Yes, as long as the lower charcoal grate is still solid and supports airflow. Many Kettle owners replace the cooking grate every few seasons and only swap the charcoal grate when it cracks or rusts through.
How often should I replace Weber Kettle wheels?
Wheels typically last several years, but patio surface, grill weight, and weather exposure all affect lifespan. If a wheel cracks, wobbles, or no longer spins freely on the axle, that’s the cue to swap it before it fails mid-roll.
Final Verdict
For most Kettle owners, the smartest starting point is the grate or wheel kit that matches the specific failure showing up on your grill right now. Pair that with quality charcoal and, if you love a good sear, a Vortex insert to round out the cook. Match the part to the model, and the Weber will keep doing what it’s done for decades.