A reliable igniter turns a stubborn, match-striking chore into a quick turn of a knob, and the difference becomes obvious the moment yours fails mid-cook. This lineup focuses on replacement igniters, electrode kits, and related burner hardware for popular gas grill lines, so you can match the right part to the right model. Each pick below is chosen for real-world compatibility, part-to-part fit clarity, and the kind of durability backyard cooks expect from a swap.
The Choices Worth Comparing
DcYourHome Emitter Plates and Igniter Module 4-Outlets Kit for Charbroil
DHLG-12 Grill Igniter Kit for Charbroil, Kenmore, Broil-Mate
DHLG-12 Grill Igniter Replacement Kit for Charbroil
Emitter Plate & Grill Grate for Charbroil Commercial 3-Burner
G511-0055-W1 4-Outlet Igniter Kit for Char-Broil Performance 4-Burner
G416-0015-W1 Grease Tray for CharBroil Performance Series
G362-2100-W1 Emitter Plates for Charbroil TRU-Infrared 2-Burner
463257520 Emitter Plates for Charbroil TRU-Infrared 4-Burner
Weber Igniter Kit for Genesis 330 Gas Grills
Why These Options Stand Out
Charbroil Commercial infrared owners running a 4-burner setup get the rare chance to swap plates and ignition in one box. The kit pairs three stainless emitter plates with a 4-outlet electronic igniter module, covering both the heat distribution side and the spark side of the fix. Emitter plates sit above the burners to spread infrared heat evenly, while the igniter module sends current to each electrode so every burner lights at once.
Each plate measures 17″ x 8 1/16″ for a combined coverage of 17″ x 24 3/16″, and the igniter module comes in at roughly 2.55″ L x 2.05″ W x 2.6″ H. The set lists fitments for Charbroil models 463242515, 463242516, 463243016, 466242515, 466242615, and a long list of related Commercial infrared SKUs, which makes model matching the main hurdle before installation.
Everyday Advantages
- Plates and module ship together, removing the need to source two parts separately
- Stainless steel construction on the plates resists rust during long outdoor seasons
- 4-outlet module fires every burner in one turn of the knob
- Wide model coverage for Charbroil Commercial TRU-Infrared grills
- OEM-style dimensions mean less trimming and a cleaner fit inside the firebox
Points To Keep In Mind
- Model matching is strict, and a misread SKU leads to plates that won’t seat properly
- Stainless plates still benefit from a light oil wipe before first cook to prevent flash rust
- Installation of the electronic module usually requires reaching behind the control panel
Key Specs
Who It Suits Best
Owners of Charbroil Commercial infrared grills with multiple corroded plates and a failing igniter get the most value from a combined kit like this.
Consider Something Else When
Charbroil Performance 4-burner owners running a non-infrared setup should look at the G511-0055-W1 4-Outlet Igniter Kit instead.
For shoppers chasing a no-fuss spark swap, the DHLG-12 lands as one of the smallest, simplest modules in the aftermarket. The kit ships a single 2-outlet push-button igniter designed for several Charbroil, Kenmore, and Broil-Mate grills, plus a handful of Nexgrill models. It’s the kind of part you grab when a button click stops producing a spark and the grill is otherwise fine.
The igniter runs on a single AAA battery, which keeps the wiring simple but means you’ll want a spare cell in a drawer for the next time the lights blink out. Owners running older grills that share the DHLG-12 footprint usually find the swap takes a few minutes, though the fitment list is long enough that a model number check matters before ordering.
Noteworthy Benefits
- 2-outlet push-button design handles most 2- and 3-burner swaps
- AAA battery operation removes any dependence on a transformer or piezo crystal
- Crossover coverage between Charbroil, Kenmore, and Broil-Mate lines
- Compact module fits tight control-panel spaces
Trade-Offs To Consider
- Battery is not included, so first use requires a separate AAA purchase
- Cold weather can shorten battery life, leaving you without a spark mid-winter
- Not a fit for 4-burner grills needing more than 2 outlets
Whose Shelf It Belongs On
Backyard cooks with a 2- or 3-burner Charbroil, Kenmore, or Broil-Mate who want a budget fix for a dead igniter get a clean match here.
Where Another Pick Suits Better
Anyone with a 4-burner Performance grill should reach for the G511-0055-W1 4-Outlet Igniter Kit for Char-Broil Performance 4-Burner instead.
Charbroil Advantage and Classic owners shopping for a 2015-or-newer replacement often land on this DHLG-12 kit because the model list lines up cleanly. The module wires to multiple Charbroil part numbers, including E401-00012-W1, C4327-3201-W1, C4666-0057-W1, and several others tied to the Advantage and Classic series. If you’ve ever stared at a corroded wire wondering whether the igniter or the electrode is the culprit, a full-module swap like this clears both doubts.
Installation tends to be approachable for anyone who’s popped a control panel before, though the wires are the kind of detail that slows first-timers down. Expect a half-hour job once you’ve confirmed the part number against your grill’s rating plate.
Positive Takeaways
- Targets the specific Charbroil part numbers most Advantage and Classic owners need
- Wires included, removing a separate trip to the hardware store
- Coverage spans 2015+ models, which lines up with the bulk of still-circulating Charbroil grills
Small Caveats
- Wire routing through the control panel is fiddly, especially on older units with tight clips
- Pre-2015 Charbroil Advantage grills fall outside the supported list
- Photo listings occasionally omit wire length, so measuring before ordering saves a return
At A Glance
Made For
Anyone with a 2015 or newer Charbroil Advantage or Classic gas grill chasing a clean, model-specific ignition replacement.
Skip It When
Charbroil Performance owners should look at the G511-0055-W1 4-Outlet Igniter Kit, which is built around a different part family.
When a Charbroil Commercial 3-burner is past the point of just swapping an igniter, this combined emitter plate and grate kit gives you the cooking surfaces back in one box. The package covers both heat-spreading emitter plates and replacement grill grates, targeting Commercial TRU-Infrared 3-burner models such as 463242515, 463242516, 463367016, and related SKUs. For a grill that lives outside year-round, that’s a meaningful refresh.
The emitter plates replace originals #G466-2400-W1 and G466-2500-W1, while the grates cover #G466-0025-W1 and related replacements. Owners tackling a full restore will appreciate that all the surface hardware arrives together, even though the box adds a little extra storage space during install.
The Value In It
- Both emitter plates and grates in one kit, removing two separate orders
- Targets the long-running 463xxxx model family common to Commercial infrared grills
- Restores even heat across the cooking surface when old plates have rusted through
- Useful for a multi-year refresh on grills stored outdoors
Things To Weigh Up
- Heavier shipping weight thanks to the grate inclusion
- Doesn’t include an igniter module, so an extra spark part is still needed if that’s also worn
- Some 3-burner models share grates but differ in plate count, so SKU verification matters
Best Suited To
Owners of Charbroil Commercial 3-burner TRU-Infrared grills doing a full surface refresh after several seasons of wear.
Look Elsewhere When
The DcYourHome Emitter Plates and Igniter Module 4-Outlets Kit is a better call for 4-burner Commercial grills that also need the spark side replaced.
The G511-0055-W1 module is the swap most Char-Broil Performance 4-burner owners end up ordering, because it lines up directly with the OEM part family. The kit includes a 4-outlet electronic igniter that handles every burner in a single click, which matters on bigger grills where one slow light throws off the whole cook. It also crosses over to Kenmore model 415.16650900, useful if your grill badge says Kenmore but the internals are Char-Broil through and through.
The module’s footprint is small at roughly 2.55″ L x 2.05″ W, and the supported model list runs deep across the 463270909, 463250109, 466250509, and related Performance 4-burner ranges. For most owners, this lands as a straightforward swap behind the control panel.
Useful Strengths
- 4 outlets match the 4-burner layout one-to-one, so no burner gets left to manual lighting
- Crosses into Kenmore grills sharing the same internals
- Compact module footprint fits original mounting points without shimming
- Model list covers a wide swath of Performance 4-burner SKUs from the last several years
A Few Limitations
- Wires for the electrodes are not always included in every batch, so check the listing
- Reaching the module on tightly packed Performance cabinets requires a long Phillips and steady hands
- Not a match for 2- or 3-burner grills, which run smaller modules
Feature Snapshot
Right Fit For
Char-Broil Performance 4-burner owners chasing an OEM-style module that lights every burner at once.
Swap It Out When
Charbroil Commercial infrared grill owners should look at the DcYourHome Emitter Plates and Igniter Module 4-Outlets Kit, which pairs the module with replacement plates.
A grease tray rarely gets noticed until it rusts through, and by then the leak is already on the deck. This G416-0015-W1 catch pan swaps directly into CharBroil Performance TRU-Infrared grills, covering models such as 463242716, 463234513, 463347518, and a long list of related Performance SKUs. It doesn’t fix the spark side of a grill, but it keeps the grease where it belongs while you address that separately.
For owners who deep-clean their grills each season, the tray pulls out and drops back in without tools, which makes routine upkeep far less annoying. The steel finish tends to handle drippings well through a normal cooking season, though owners commonly report that a quick foil liner extends its life further.
A Favorable Mix
- Direct fit for a wide range of Performance TRU-Infrared models
- Pull-out design suits seasonal cleaning routines
- Pairs well with separate emitter plate or igniter refreshes
Potential Drawbacks
- Doesn’t include an igniter, so it’s a partial fix for a non-starting grill
- Steel construction means a foil liner is still smart insurance for long-term use
- Some 5-burner Performance models fall outside the listed fitments
Who Should Grab It
CharBroil Performance TRU-Infrared owners chasing a clean catch pan replacement during a routine maintenance pass.
Not Your Match When
Anyone whose grill won’t light at all should start with the G511-0055-W1 4-Outlet Igniter Kit for Char-Broil Performance 4-Burner to fix the spark side first.
Two-burner Charbroil TRU-Infrared grills have a smaller emitter footprint than their 4-burner siblings, and this G362-2100-W1 plate set fits that exact footprint. The kit targets models such as 463644220, 466642416, 463642316, and several other 2-burner infrared SKUs, which makes it the right call for compact patio setups where every plate inch matters.
On a 2-burner, you usually only need to order one set of plates since the firebox is narrower. Owners report that the plates drop into place without trimming, and a light coat of oil before the first cook helps them season into a uniform cooking surface.
Notable Gains
- Tailored to the smaller 2-burner TRU-Infrared footprint
- Direct OEM-style fit reduces install time
- Restores even infrared heat distribution on compact grills
Honest Caveats
- Igniter module not included, so a no-spark grill needs a separate fix
- Only fits 2-burner models, so 4-burner owners need the 463257520 plates instead
- Coating can flash-rust without a quick oil wipe before first use
Perfect Match For
Patio and balcony cooks running a Charbroil 2-burner TRU-Infrared who want to refresh warped or rusted plates without overbuying.
Reach For A Different Pick When
Charbroil 4-burner TRU-Infrared owners should look at the 463257520 Emitter Plates for Charbroil Tru-Infrared 4-Burner instead.
Charbroil TRU-Infrared 4-burner owners chasing an OEM-style plate replacement land here, since 463257520 lines up with the original part number G533-2200-W1. Each plate runs 17″ long, which matches the wider firebox of 4-burner models such as 463257520, 463242716, 463255020, and the related Performance 4-burner family. For anyone whose plates have flaked or rusted unevenly, this set returns the cooking surface to spec.
Installation is essentially a plate-by-plate swap once the grates are off, and a wire brush pass on the burners while you’re in there tends to pay off. Owners running these grills through winter cover the plates with a light oil film before storage, since bare steel will flash-rust in a humid garage.
Everyday Wins
- OEM reference G533-2200-W1 for confident model matching
- 17″ plate length matches 4-burner firebox dimensions
- Crossover fit into Kenmore models with the same footprint
- Restores even infrared heating across the full cook surface
Where It May Fall Short
- Doesn’t include the igniter module, so a separate spark fix may still be required
- Pre-seasoning with oil is worth doing to prevent first-use flash rust
- Some 5-burner Performance grills need a longer plate run, so verify before ordering
Built With In Mind
Charbroil 4-burner TRU-Infrared owners replacing worn plates on grills with OEM reference G533-2200-W1.
A Better Fit Elsewhere
Anyone whose grill also needs a new igniter should consider the DcYourHome Emitter Plates and Igniter Module 4-Outlets Kit to address both at once.
Weber Genesis 330 owners with front-mounted control panels get a clean OEM answer here, since the kit is built specifically for that grill line. The electronic ignition system replaces the original igniter components, reigniting a grill that has started clicking without lighting. For a Weber that’s otherwise in great shape, swapping the igniter is the cheapest path back to a reliable push-button start.
The kit uses plastic housing components consistent with the original Weber design, which keeps the look familiar behind the front panel. Owners commonly report that the install takes longer than expected the first time, mostly because reaching the igniter cap from underneath the control panel is the awkward part.
Features That Help
- Genuine Weber part designed for Genesis 330 front-control models
- Electronic ignition restores one-click lighting
- Plastic housing matches the original aesthetic behind the control panel
Things To Consider
- Specific to Genesis 330 front-control models, so check your control panel position before ordering
- Install requires reaching behind the manifold, which can be tight on older Genesis cabinets
- Doesn’t include electrodes or wires, so worn electrode ends may need a separate replacement
Quick Facts
Who Will Love This
Weber Genesis 330 owners with front-mounted control panels who want a genuine replacement that returns the grill to its original lighting feel.
Where Another Pick Suits Better
Charbroil owners across most lines will find more specific fits in the DHLG-12 or G511-0055-W1 kits earlier in this list.
What Matters Most When Choosing Barbecue Grill Igniters
The single most important step is matching the part number on your grill’s rating plate to the kit’s supported model list, since most igniter swaps fail at the door when a model number is misread. Electrode kits, igniter modules, and emitter plates all carry their own fit families, and one model can require different parts across the same brand line.
Once the part is correct, the next consideration is how many outlets you need, since a 2-burner grill running a 4-outlet module wastes wires and a 4-burner grill running a 2-outlet module leaves two burners unlit. Battery-powered push-button modules keep wiring simple but do require a spare cell, while electronic transformer modules tie into the grill’s existing harness.
Confirming Model Numbers
Before anything else, pull the rating plate from inside the cabinet or under the control panel and write down the full model string, including any suffixes. The Charbroil 463xxxx codes and the Weber Genesis variants differ even between visually identical grills, so the plate is the only reliable answer.
Counting Burners and Outlets
Each igniter outlet feeds one burner, so a 3-burner grill needs at least 3 outlets to light everything in a single click. Over-outleted modules still work, but under-outleted ones leave burners cold until you light them manually.
Considering Plate Versus Igniter Fixes
A grill that won’t light usually points to the igniter module or electrodes, while uneven cooking temperatures usually point to the emitter plates. Some kits pair both, which makes sense if the grill has sat unused through several winters.
Picking Battery Versus Electronic Modules
Battery modules simplify installation and stay independent of the grill’s wiring harness, while electronic modules deliver stronger sparks in cold weather. Your grill’s original wiring usually decides which type fits without rewiring.
Key Considerations Across These Picks
Where Shoppers Go Wrong
The most common slip-up is trusting a model name like “Charbroil Performance” without checking the full numeric SKU, since one model line can span 2-, 3-, 4-, and 5-burner variants with completely different parts. A second trap is buying an igniter module when the real failure is a corroded electrode tip, which a $5 wire and plug can often fix. Always inspect the electrodes and wires before swapping the module itself.
When Paying More Pays Off
Higher-tier kits in this category tend to bundle plates plus the igniter, which saves on shipping and ensures the heat side and spark side age at the same rate. OEM-style parts also tend to drop into existing mounting points without shimming, which saves an afternoon of filing and trimming. For a grill you plan to keep another five seasons, the bundled kits usually return their cost in avoided second orders.
Frequently Asked Questions
How do I know which igniter my grill needs?
Open the cabinet and look for a metal rating plate with a model number, then match it against the kit’s supported model list. The full numeric SKU matters more than the brand name, since similar model lines often use different ignition parts.
Can I replace just the electrode instead of the whole module?
Yes, if the module still clicks and the electrode tip is visibly corroded or cracked. Swapping the electrode and wire is a smaller repair, and many grillers keep a spare on hand for exactly that situation.
How long do grill igniters usually last?
A typical electronic igniter lasts several years, though outdoor storage, spider nests in the burner tubes, and repeated moisture exposure shorten that. Owners commonly report that a covered grill gets noticeably longer igniter life than one left fully exposed.
Are aftermarket igniter kits safe to use on gas grills?
Aftermarket kits that match the OEM footprint and use the same wiring approach are widely used and considered safe when installed to the original layout. Avoid altering the gas manifold or rerouting fuel lines during an igniter swap, since those changes fall outside a normal parts replacement.
Do igniter kits include everything needed for install?
Some kits include wires and electrodes, while others ship only the module. Check the listing carefully, since a module-only kit on a grill with worn electrodes means ordering a second part to complete the repair.
Closing Remarks
The right igniter kit comes down to your grill’s exact model number and how many burners you need to light at once, with the rest of the choice shaped by whether the plates also need refreshing. Match the SKU first, count the outlets second, and pick a kit that fits your grill’s age and storage conditions. Once those three line up, the swap is a Saturday afternoon job rather than a guess.