Grease fires, scorched trays, and that one weekend where cleanup takes longer than the cookout itself: that’s the everyday reality a good drip pan solves. A barbecue drip pan is a small accessory that quietly protects your grill from fat buildup, prevents flare-ups before they start, and turns a messy scrub-down into a quick liner swap. The right fit depends on your grill model, cooking frequency, and how much you want to think about maintenance between sessions. This roundup walks through ten solid options across the major grill brands so you can match the pan to your setup and get back to the actual grilling.
The Leading Options At A Glance
LS’BABQ 70379 Grill Grease Catch Pan for Weber Genesis II 400/600
Weber Aluminum Drip Pans, 10-Pack
LS’BABQ 93305 83156 Catch Pan Kit for Weber Spirit 200/300
Traeger Grills HDW152 Grease Bucket
Kingsford Fish and Veggie Aluminum Grill Liners, 24 Ct
Fig & Leaf Weber Compatible Aluminum Drip Pans, 35 Pack
MOASKER Drip Tray Heat Baffle and Liners Kit for Camp Chef 24
LS’BABQ 67047 Catch Pan for Weber Spirit 200/300
MOASKER Drip Pan Heat Baffle and Liners Kit for Camp Chef 36
MOASKER Drip Pan Heat Baffle and 5 Liners Kit for Traeger Silverton
A Closer Look At Each Pick
Picture a Saturday afternoon cookout where the Genesis II runs hot for five hours straight: that’s the workload this LS’BABQ catch pan is built to absorb. It targets the larger 400 and 600-series Weber gas grills, and it ships with a reusable aluminum tray plus a ten-pack of foil liners so cleanup is a one-hand swap.
Where the Weber Aluminum Drip Pans on this list handle liner duty only, this kit gives you both a permanent tray and disposable inserts, which reduces direct contact between grease and the tray floor. The fit list covers Genesis II 400/600, Genesis II LX 400/600, and the Summit 400/600 range, so a single tray can move between grills in the same family.
Real-World Strengths
- Reusable tray plus ten foil liners means the grease never touches the tray surface directly
- Wide compatibility with the 400/600 series makes it flexible for households with multiple Weber models
- Liner replacement takes seconds, so mid-cook swaps don’t interrupt a long grilling session
- Trays of this size handle large family meals without overflow on a typical Saturday cook
Things To Consider
- Confirming model year matters, since some earlier Genesis II configurations used a slightly different geometry
- The bundled liner count may run short for someone grilling three or four times a week
Who It Suits Best
This one fits owners of full-size Weber 400 or 600-series gas grills who cook often enough that disposable liners save real time on every session.
Where Another Pick Suits Better
Shoppers running a Spirit 200 or 300 should look at the LS’BABQ 67047 Catch Pan instead, since that tray is sized for the smaller Spirit family.
These OEM-style liners from Weber drop into the existing grease tray of compatible gas grills without any tray swap. You get ten pans per pack, so a single order covers a long stretch of weekend cooking, and the aluminum is fully recyclable, which keeps disposal simple.
Compatibility reaches across several Weber lines, including SmokeFire, Summit 400/600, Summit Gold 6-burner, Summit Platinum, and Genesis II 400/600 models. For a household already using Weber gear, the brand-fit angle removes the trial-and-error that comes with sizing unknown aftermarket pans.
Real Benefits
- Direct-fit OEM liners that slide into the existing tray with no adapter or trimming
- Ten pans per pack covers weeks of weekend grilling before a reorder is needed
- Recyclable aluminum construction simplifies end-of-cook disposal
- Removes the need to scrape the tray, since grease stays on the disposable liner
Honest Caveats
- These are liners only, so a worn or bent original tray still needs replacing separately
- Compatibility stops at the listed Weber families, so Traeger and Camp Chef users should look elsewhere
Built With In Mind
Weber gas grill owners who already have a working tray and just want quick liner swaps between sessions will get the cleanest experience from this pack.
Look Elsewhere When
Traeger pellet grill owners should pick up the Traeger Grills HDW152 Grease Bucket, since that model mounts to a totally different grease channel.
Older Weber Spirit and Genesis grills are everywhere in suburban backyards, and finding a tray that actually fits the original 93305 or 83156 footprint can be a headache. This LS’BABQ kit solves that with a reusable catch pan sized to the 7515 spec, plus ten foil liners for disposable cleanup.
The fit list stretches back across the Genesis 1000 through 5500 series, Silver, Gold, and Platinum trims, plus Spirit 200/300 units that predate the 2009 redesign. That breadth matters for someone who inherited or bought a used grill and needs a replacement tray that drops straight in.
Reasons It Performs
- Catch pan plus ten liners bundled together, so no separate parts run
- Reaches back into older Genesis 1000 to 5500 models that newer kits often skip
- Fits the classic 7515 footprint used across many Spirit trims
- Disposable liners keep grease off the reusable tray, extending its service life
Worth Noting
- Does not fit Spirit models with side-mount controls from after 2008 or front-mount control panels, so model-year checking matters
- The bundled liner count is modest for someone grilling every other day in summer
Key Specs
Right Fit For
Owners of older Weber Spirit or Genesis grills who want a no-guesswork tray and liner bundle without paying for premium branding.
Skip It When
Anyone with a newer Spirit II 200/300 should grab the LS’BABQ 67047 Catch Pan instead, since that version targets the post-2013 footprint.
Pellet grills route grease through a different system than gas grills, and the Traeger HDW152 bucket catches the drip from a long vertical run of tubing. Built from galvanized steel, it’s the kind of part that sits outside in a Texas summer or a Wisconsin winter without complaint.
Compatibility covers a long stretch of Traeger history, including the Junior Elite 20, Tailgater 20, Bronson 20, Lil Tex Elite 22, Century 22, Eastwood 22, Pro 34, and Texas Elite 34. For a household that rotates between a portable and a full-size pellet grill, the same bucket spec can serve both.
Everyday Perks
- Galvanized steel resists rust through repeated outdoor exposure
- Compact 6-inch footprint keeps it tucked alongside the grill without taking up patio space
- Wide compatibility across Traeger’s older and current portable lines
Possible Compromises
- It’s a bucket, not a tray, so it does not protect the grill’s internal heat shield the way a baffle kit does
- Traeger has shifted part numbers on newer grills, so verifying against the model is worthwhile
Best Suited To
Traeger pellet grill owners who want a rugged catch bucket that handles the slow, steady drip of long low-and-slow cooks.
Another Choice May Suit
Anyone running a Silverton 620 or 810 will get better coverage from the MOASKER Drip Pan Heat Baffle and 5 Liners Kit for Traeger Silverton.
These Kingsford liners solve a different problem than the other picks on this list: they sit directly on the cooking grate to cradle delicate foods. A 16 by 11.75-inch sheet gives whole fish fillets and sliced vegetables enough room without falling apart, and the non-stick aluminum keeps skin from welding to the grates.
Because they work on any grill, including public park grills at the lake or campground, they’re a smart pick for renters and travelers who can’t swap trays on unfamiliar equipment. Flare-ups drop noticeably when drippings land on aluminum rather than open flame.
What It Does Well
- Holds fish and vegetables intact where grates alone would let them fall apart
- Universal fit means they work on park, campground, or rental grills
- Non-stick surface keeps cleanup to a single disposal step
- 24 liners per pack gives generous coverage for a full grilling season
Trade Offs
- They don’t replace a grease tray, so they pair with whatever drip system you already run
- Very high heat over a long cook can thin the aluminum, so flame management matters
Feature Snapshot
Whose Shelf It Belongs On
Home cooks who grill delicate fish and vegetables often, or anyone who cooks on shared grills at parks, beaches, or campgrounds.
Reach For A Different Pick When
For under-tray grease management on a Weber gas grill, the Weber Aluminum Drip Pans 10-Pack is a more direct fit.
For someone who fires up the grill three or four times a week, a 10-pack disappears fast. This Fig & Leaf set ships 35 aluminum pans sized for the Weber Q, Spirit, and Genesis 200/300 ranges, which stretches a single purchase through most of the grilling season.
Each pan measures roughly 7.5 by 5 inches at the base and 8.5 by 6 inches at the top, with a 1.5-inch height that catches a meaningful amount of drip before overflow. The aluminum is rated to handle high grill temperatures without buckling, and the disposable design means no scraping the tray at the end of the night.
The Practical Payoff
- 35 liners per pack drives the per-cook cost down for frequent grillers
- Compatible with the Q, Spirit, and Genesis 200/300 series in one SKU
- Heat-tolerant aluminum stands up to standard gas grill temperatures
- Disposal is a single step, with no tray scrubbing between sessions
Trade-Offs To Consider
- These are pans only, so a missing or damaged tray still needs a separate purchase
- The aftermarket fit can be slightly off on grills with non-standard tray geometry
Made For
Active grillers running a Weber Q or 200/300-series gas grill who want a high liner count at a friendly per-unit cost.
A Better Fit Elsewhere
Owners of Weber 400/600-series grills will find a more accurate fit from the LS’BABQ 70379 Catch Pan kit.
Pellet grills take a real beating under the firepot, and a heat baffle does the work of spreading that heat evenly while protecting the drip tray below. This MOASKER kit pairs a steel baffle with replacement liners, so a Camp Chef 24-series owner gets both the structural part and the disposable layer in one box.
Compatibility stretches across the Woodwind Classic 24, Woodwind WiFi 24, Woodwind SG 24, and SmokePro SG, XT, and STX 24 trims. A few Traeger Pro 20, 22, and 575 models also line up with the same dimensions, which broadens the kit’s reach.
The Upside
- Heat baffle plus liners means heat distribution and grease capture are addressed together
- Cross-compatibility with several Traeger 20/22/575 models raises the value
- Replacing a worn baffle restores even cooking on aging pellet grills
Where It Is Less Suited
- Not a fit for the larger 36-inch Camp Chef or 34-inch Traeger series, which need a wider baffle
- The baffle’s steel finish can discolor under heavy use, though that doesn’t affect function
Spec Overview
Who Will Love This
Camp Chef 24-series pellet grill owners who need to replace both a worn heat baffle and the liner underneath in one purchase.
Swap It Out When
Anyone running a Camp Chef 36 or a Traeger 34 will find the larger MOASKER Drip Pan Heat Baffle and Liners Kit a more accurate fit.
The Spirit 200 and 300 series are workhorse mid-size Weber grills, and they share a tray footprint that’s slightly different from the older Spirit lineup. This LS’BABQ catch pan hits that exact profile, plus it doubles as a Traveler replacement, which is helpful for households that own both a stationary and a portable Weber.
Like the larger 70379 kit reviewed earlier, you get a reusable aluminum tray plus ten disposable foil liners. The compatibility list runs through Spirit II E210, S210, E220, S220, E310, E320, E330, S310, S320, S330, and the matching Spirit E/S 300 models, then continues into the Genesis 200/300 and Genesis II/II LX 200/300 range.
Well-Handled Touches
- Direct fit for the post-2009 Spirit 200/300 and the Spirit II family
- Works as a Weber Traveler replacement, which is a useful second role
- Ten foil liners included, so cleanup is a swap rather than a scrub
- Compatible footprint extends into the Genesis 200/300 series for flexible use
Potential Drawbacks
- The bundled liner count is modest for someone grilling most days of the week
- Aftermarket fit can vary on grills with non-standard control layouts, so model-year matching pays off
Perfect Match For
Daily Spirit 200 or 300 users who want a direct-fit tray and the convenience of disposable liners in the same box.
Not Your Match When
Anyone running a Spirit from before 2009 or an older Genesis should consider the LS’BABQ 93305 83156 Catch Pan Kit, which covers that earlier geometry.
The 36-inch Camp Chef and the Traeger 34 are the kind of grills that feed a crowd, and the drip area underneath has to keep up. This MOASKER kit supplies a wider heat baffle plus five liners, sized for the SmokePro LUX 36, Woodwind WiFi 36, and the Traeger Pro and Texas Elite 34 lines.
For owners of a Traeger Pro 22 or Pro 20, the same brand family offers smaller baffles, so the 36-inch kit is clearly the heavy-duty sibling. Replaces the Traeger OEM BAC-006 reference on the Pro and Texas Elite 34 trims.
Key Advantages
- Wider baffle coverage matched to the 36-inch and 34-inch pellet platforms
- Five liners per kit handles a full season of weekend cooks
- Cross-compatible with Traeger Pro 34 and Texas Elite models beyond Camp Chef
- Direct replacement for the Traeger BAC-006 part reference
Smaller Caveats
- Liners are thicker than basic foil, so they last longer but cost a bit more per piece
- Not a fit for the 24-inch Camp Chef, where the smaller MOASKER baffle kit is the right size
Product Snapshot
Who Should Grab It
Owners of a 36-inch Camp Chef or 34-inch Traeger who need a structural baffle replacement plus matching liners in one package.
Consider Something Else When
For a 24-inch pellet grill, the smaller MOASKER Drip Tray Heat Baffle and Liners Kit for Camp Chef 24 is the right size.
The Traeger Silverton 620 and 810 sit at the high end of the brand’s lineup, and the OEM drip tray part number KIT0532 isn’t always easy to source. This MOASKER kit is built specifically for those two models, including a heavy-duty steel baffle measuring roughly 26.25 by 14 by 3.5 inches.
Five matching liners come in the box, sized to drop into the same channel as the OEM BAC597 part. For a household that grills multiple times a week on a Silverton, the structural baffle plus liner pairing handles both heat distribution and grease capture without mixing and matching brands.
Noteworthy Benefits
- Tailored to the Silverton 620 and 810 for a more accurate fit than generic baffles
- Heavy-duty steel baffle resists warping at sustained high heat
- Five liners cover extended use between replacements
Points To Keep In Mind
- Specialty fit means it’s not a useful spare for other Traeger models in the household
- Higher part count adds some assembly compared to a simple liner swap
Who Will Love This
Traeger Silverton 620 or 810 owners who want a baffle and liner kit that mirrors the OEM dimensions without paying dealer pricing.
A Better Fit Elsewhere
Anyone running a Traeger Pro 34 or a Camp Chef 36 should look at the MOASKER Drip Pan Heat Baffle and Liners Kit for Camp Chef 36, which targets that larger platform.
What To Weigh Before Choosing Barbecue Drip Pans
A drip pan looks like a small accessory, but the wrong fit can mean grease leaking past the tray edge or liners that buckle under high heat. The biggest decision is whether you need a replacement tray, a set of liners, or both bundled together. Reusable aluminum trays last for years but need a scrub now and then, while disposable liners trade a small recurring cost for a faster cleanup.
Grill compatibility is the next filter. Weber, Traeger, and Camp Chef all use different tray geometries, and a pan that fits a Genesis II 400 won’t drop into a Spirit 200. Check the model number on the existing tray or the grill’s spec sheet before ordering. Pellet grills often need a heat baffle in addition to a drip pan, because the baffle distributes firepot heat evenly across the cooking surface.
Cooking style shapes the rest. Fish and vegetable cookouts benefit from non-stick grate liners like the Kingsford set, while high-volume grillers want a 35-pack of tray liners to avoid running out mid-month. Frequency matters more than grill size: someone who cooks three nights a week burns through liners faster than a once-a-week weekend griller, regardless of the grill.
Picking Smart Across This Category
Common Shopping Slip Ups
The most common miss in this category is buying the wrong model-year footprint. Weber Spirit grills made before 2009 use a different tray than the post-2009 redesign, and the same goes for some Genesis generations. A pan that “looks right” in photos can still sit a quarter-inch off, which lets grease slip past the edge.
Another trap is assuming any aluminum foil pan will handle grill heat. Standard kitchen foil pans can buckle at sustained high temperatures, while grill-rated liners are made from thicker aluminum that holds shape. Reading the heat tolerance on the listing, rather than just the dimensions, saves a mid-cook replacement.
Where The Extra Money Goes
Higher-tier kits in this category usually bundle a reusable tray with disposable liners, plus a heavier-gauge aluminum that resists warping. A heat baffle adds another layer of value on pellet grills, where even heat distribution matters as much as grease capture. The premium pays off when the grill sees weekly use, because the structural parts outlast the liners and reduce long-term replacement runs.
For someone who grills once a month, the basic liner pack is plenty. For daily or weekly cooks, the bundled kits reduce per-session cleanup time and protect the tray underneath from the kind of buildup that eventually causes corrosion.
Frequently Asked Questions
How often should barbecue drip pans be replaced?
Disposable aluminum liners are usually replaced after every one to three cookouts, depending on grease volume. Reusable aluminum trays can last multiple seasons if they’re not visibly warped or punctured.
Are thicker drip pans worth the extra cost?
Thicker aluminum resists warping at sustained high heat, which matters on gas grills that run hot for long cooks. For occasional use, a standard liner thickness is enough.
Can I use the same drip pan on a gas grill and a pellet grill?
Generally no. Gas grills and pellet grills route grease through different channels, and the tray geometry is rarely interchangeable. Match the pan to the grill family for a proper seal.
What’s the difference between a drip pan and a heat baffle?
A drip pan catches grease below the cooking surface, while a heat baffle sits above the firepot to spread heat evenly. Pellet grills often need both, while gas grills usually only need a drip pan.
Do aluminum drip pans affect food flavor?
In normal use, no. The aluminum is below the cooking surface and out of direct contact with food, so it doesn’t contribute off-flavors. Heavy flare-ups can char liner material, which is why liner replacement matters.
The Takeaway
The right barbecue drip pan comes down to matching the part to your grill model and the way you actually cook. OEM-style liners give the cleanest fit for Weber owners, bundled tray-plus-liner kits cut down on per-cook cleanup, and pellet grill owners should pay attention to heat baffles, not just grease capture. Pick the option that matches your grill’s model number and your cooking frequency, and the rest of the season practically runs itself.