Grass clippings spread across the lawn can smother new growth and leave you with patchy spots by midsummer. A bagger for riding mower owners collects clippings as you mow, which saves an hour of raking and keeps the turf breathing. This list pulls together full bagger attachments, replacement bags, and small latch hardware so you can match the right part to your deck, brand, and clipping volume.
The Choices Worth Comparing
8TEN Grass Bag for Cub Cadet MTD Troy Bilt
Husqvarna 400226 Lawn Tractor Bagger Container
109808X Mower Bagger Chute Latch
Husqvarna 532109808 Mower Bagger Hood Latch
fascinatte 109808X Tractor Bagger/Hood Latch
2 Pack 964-05104 Grass Bag Assembly
109808X 160793 Latch Assembly with Hardware
160793 Set of 2 Lawn Mower Bagger Latches
fascinatte 160793 Bagger Latch Chute, 2 Pack
964-05104 Grass Bag Assembly 3 Pack
The Picks, Examined More Closely
Suburban lots mowed weekly tend to wear through a single fabric bag within a season or two, especially when the grass is damp and heavy. This two-pack from 8TEN targets the most common MTD-family replacement numbers (964-05104, 964-04090A, and 964-04096A) so you keep a fresh bag on hand when the original finally rots or tears at the seam.
The kit covers a wide swath of deck sizes from RZT 42 inch up through 54 inch machines, which makes it a flexible match for older Cub Cadet and Troy Bilt riders in the shed. For shoppers running a twin or triple rear bagger frame, the spare-bag format means you rotate worn bags out without shutting down the mow.
Useful Highlights
- Two replacement bags in one purchase, so you rotate without downtime
- Covers the most common MTD-family part numbers (964-05104 and 964-04096A families)
- Works across 42 through 54 inch deck sizes on Cub Cadet and Troy Bilt riders
- Fabric construction stays light, which keeps the rear hitch balanced
Things To Consider
- Frame and chute hardware are not included, so existing components must be intact
- Owners commonly report that fabric-only bags stretch sooner than hard-bottom designs on heavy spring growth
Made For
Riders with MTD-family twin or triple bagger frames who want a cheap spare ready before peak season.
Consider Something Else When
If you need a hard-bottom bag for a 60 inch deck, the deawater 3 Pack below covers that larger cut.
A bagger that fits the tractor on the first try saves a return trip and a weekend of frustration. The Husqvarna 400226 is the factory container assembly for several legacy Husqvarna lawn tractors, which makes it the safe pick when you want an exact-match replacement rather than a third-party imitation.
The unit replaces the older 532400226 container and bolts onto existing frames on supported models. For owners with a Craftsman or AYP riding mower that shares the Husqvarna DNA, this genuine container slots in without modification.
A Favorable Mix
- Original equipment fit removes the guesswork from part compatibility
- Direct replacement for the 532400226 container reference
- Designed to seat against the chute without extra shimming
- Backed by Husqvarna’s manufacturing tolerances rather than aftermarket copies
Points To Note
- Confirm your tractor model before ordering, since container geometry varies by deck size
- OEM containers typically run pricier than third-party fabric-only replacements
Feature Snapshot
Best Suited To
Husqvarna lawn tractor owners who want a factory-spec container without improvising a third-party part.
Skip It When
If your tractor is a Cub Cadet or MTD model, the 8TEN replacement bags above will cover your deck better.
Tree trunks and fence posts do a number on the small plastic parts that hold a bagger together. The fascinatte 109808X chute latch is a focused repair piece for the bracket stud that gets snapped when the chute snags an obstacle, leaving the upper and lower chute loose and leaky.
Replacing this latch is far cheaper than swapping the entire chute assembly, which is why this part shows up in so many garage drawers. It targets Husqvarna and Craftsman tractors, and drops into the same mounting pattern as the 532109808 reference number.
Well-Handled Touches
- Small repair cost compared to a full chute assembly replacement
- Targets the most commonly broken stud location on Husqvarna and Craftsman chutes
- Direct cross-reference to the 532109808 OEM latch
- Lightweight install that most homeowners finish in under an hour
Honest Caveats
- Only addresses the latch, not cracked chute plastic, so inspect the surrounding housing before fitting
Perfect Match For
Tractor owners whose chute wobbles loose after a brush with a tree but whose plastic is otherwise intact.
Look Elsewhere When
Older Poulan tractors often need the longer 160793 strap instead, which the Gpartsden kit covers.
For Sears, Craftsman, AYP, and Husqvarna riders, the 109808X hood latch has been a repeat replacement for decades. This aftermarket strap version mimics the OEM geometry so the upper and lower chute halves stay cinched together during a full mow.
It’s a single strap, so you buy what you need without paying for hardware kits you’ll never open. For homeowners with one tractor and a small garage shelf, that matters more than the latest material compound.
Everyday Perks
- Direct fit for the popular 109808X / 532109808 latch reference
- Covers Sears, Craftsman, AYP, and Husqvarna bagger setups
- Single-strap format keeps cost low
- Aftermarket construction handles repeated seasonal swaps
Small Caveats
- Mounting hardware is sold separately, so check your existing screws before install
- Rubber strap can stiffen in cold weather, depending on regional climate
Feature Snapshot
Who Should Grab It
Homeowners nursing a Craftsman or AYP rider back to life with a single broken latch strap.
Another Choice May Suit
For a 42 or 46 inch deck that needs hardware included, the fascinatte 109808X kit below is a closer fit.
When your tractor’s badge says Husqvarna but the deck width is a Craftsman standard, parts shopping gets confusing fast. The fascinatte 109808X hood latch resolves that overlap by listing compatibility across Craftsman, Husqvarna, Poulan Pro, Weedeater, AYP, and EHP riding mowers with 42 or 46 inch decks.
It ships with the mounting hardware you need to finish the swap, which saves a trip to the hardware store for a specific shoulder bolt. For owners juggling multiple older tractors, having one shared part number simplifies the spare-parts shelf.
Bright Spots
- Hardware included, so the install finishes in one session
- Covers the most common 42 and 46 inch deck widths
- Cross-brand fit reduces spare-part inventory in the garage
- Replaces both 109808X and 532109808X references
Worth Bearing In Mind
- Confirm your deck size before fitting, since 42 and 46 inch hardware layouts differ slightly
Whose Shelf It Belongs On
Households running a small fleet of older Husqvarna or Craftsman riders who want one latch that works across machines.
Reach For A Different Pick When
Poulan owners chasing a strap-and-hook combo will find the Gpartsden 109808X 160793 set a more complete bundle.
The Braveboy twin-pack covers the MTD part-number families that show up on the most common rear bagger frames in American garages. The kit lists 964-05104, 964-04090A, and 964-04096A as supported references, alongside several older 664-prefix numbers that turn up on legacy Cub Cadet and Troy Bilt riders.
Two fabric assemblies in a single order is the practical sweet spot for homeowners who mow a half-acre lot every week. One bag stays on the frame while the other dries out or sits on the bench, ready for a quick swap when the active bag finally springs a leak.
Useful Touches
- Two bags per order, ideal for rotating a wet bag with a dry spare
- Broad MTD part-number coverage including 964-05104 and 964-04096A
- Works on Cub Cadet, Troy Bilt, Craftsman, Bolens, Ryobi, Yardman, and Yard Machine mowers
Trade Offs
- Frame and hardware are not part of the kit, so existing components must remain serviceable
- Light fabric construction is gentle on the hitch but can stretch under heavy clippings
Built With In Mind
MTD twin bagger owners on 42 or 44 inch decks who want a ready spare before the next mowing season.
A Better Fit Elsewhere
For triple bagger frames or larger 50 to 60 inch decks, the deawater 3 Pack further down handles the wider spread.
Older Poulan and Husqvarna bagger setups use two latch styles in tandem, and tracking down each one separately is annoying. The Gpartsden kit bundles both the 109808X and 160793 straps with their hooks and mounting hardware in one box, which keeps the bench organized.
The kit cross-references a long list of OEM numbers (723-0383, 539108091, 532130758 among others), which makes it a catch-all for machines that span more than one production era. For Poulan models like the 12597RB, it’s a near-direct fit.
Strong Points
- Two strap styles plus hardware included, so the install finishes in one session
- Catches both 109808X and 160793 references in a single purchase
- Long list of OEM cross-references covers several older production runs
Practical Considerations
- Extra hardware may go unused if your tractor only needs one strap type
- Confirm your model against the cross-reference list before ordering, since the bundle covers many variations
Feature Snapshot
The Right Fit
Shoppers maintaining an older Poulan or Husqvarna tractor that needs both latch styles refreshed in one go.
Swap It Out When
For a single broken strap on a 42 inch Craftsman, the basic Husqvarna 532109808 latch keeps things simpler.
Most AYP and Husqvarna tractors need two latches per chute, and replacing them one at a time means a second order in two months. This fascinatte two-pack covers both sides of the bagger at once, with strap geometry that matches the 532160793 OEM reference.
The set also cross-references several legacy numbers (130758, 130759, 130760), which is helpful if your operator’s manual lists an older part code. For a routine strap refresh before peak mowing season, the twin-pack format is the efficient move.
The Practical Payoff
- Two straps in one order, so both chute sides get refreshed together
- Direct fit for the 532160793 OEM latch
- Cross-references 130758, 130759, and 130760 for legacy models
Room For Improvement
- Hardware is sold separately, so order the corresponding screws ahead of the install
- Strap length runs shorter than the 160793 variant below, so measure before swapping
Who Will Love This
AYP and Husqvarna owners planning a full strap refresh on a single tractor before the spring cut.
Where A Sibling Pick Shines
For a longer strap reach on 42 or 46 inch decks, the fascinatte 160793 2 Pack below has the extra length built in.
When the bagger chute sits farther from the frame mount, a short strap pulls tight before the latch engages. The fascinatte 160793 two-pack measures 4-3/4 inches from the end of the hook to the end of the rubber strap, giving you the extra reach that wider chute geometries need.
It fits 42 and 46 inch decks across AYP, Craftsman, and Husqvarna tractors, and ships with mounting hardware. For owners measuring an old strap before ordering, this longer variant avoids the frustrating mid-install discovery that the replacement is half an inch short.
What It Does Well
- 4-3/4 inch hook-to-strap reach, longer than the standard 160793 variant
- Two-pack format refreshes both chute sides at once
- Mounting hardware included
- Covers 42 and 46 inch deck sizes
Soft Spots
- Extra length may be unnecessary on tractors with tighter chute geometry
- Hardware kit is generic, so double-check thread size against your existing screws
Right Fit For
Tractor owners whose chute geometry demands a longer strap than the OEM 160793 provides.
Not Your Match When
Older Poulan builds that need both strap styles should jump to the Gpartsden 109808X 160793 hardware bundle.
Triple bagger frames on wide-deck mowers (think 50 to 60 inch cuts) eat through fabric fast because each pass pushes more clippings per minute. The deawater three-pack replaces the most common MTD-family part numbers (964-05104, 964-04090A, 964-04096A) and adds a hard bottom that resists the sag you get with fabric-only bags over time.
The hard bottom also keeps the bag’s shape during dumping, so clippings slide out cleanly instead of clinging to a drooping seam. For properties where a triple bagger gets weekly use through spring and fall, the three-bag format means you cycle through the rotation before any single bag wears out.
What Pays Off
- Three bags per order, sized for triple bagger frames on wide decks
- Hard bottom design resists sag and sheds clippings cleanly at dump time
- Covers 42 through 60 inch MTD-family decks
- Broad compatibility across MTD, Troy-Bilt, Cub Cadet, and Craftsman riders
Points To Keep In Mind
- Catcher frame, mounting frame, and hardware are not included, so existing parts must be intact
- Hard bottom adds weight, which matters if your hitch already sits near its limit
Feature Snapshot
Who It Suits Best
Owners of wide-deck MTD-family mowers with triple bagger frames who want a season’s worth of bags in one order.
Where Another Pick Suits Better
For a basic twin-bag MTD setup on a 42 or 44 inch deck, the Braveboy 2 Pack is a leaner match.
Matching Baggers and Hardware to Your Tractor
A bagger setup is really two purchases: the bag itself (or the full container assembly) and the small hardware that keeps it attached. Start by confirming your tractor’s brand, deck size, and the OEM part number stamped on the bag you’re replacing. Cross-reference that code against the listings above, since one Husqvarna or MTD number can hide inside several model years.
Deck size matters more than most shoppers expect. A 42 inch deck typically pairs with a twin-bag frame, while 46 to 60 inch decks often run triple-bag frames. The replacement bags in this list cover both formats, but the latch hardware is generally deck-size agnostic, so a 109808X or 160793 strap works across a wide range of machines.
Bag material is the other big decision. Fabric-only bags are light and cheap, but they stretch under heavy spring growth and tend to tear at the seams after a season or two. Hard-bottom bags cost a bit more and weigh slightly more on the hitch, but they keep their shape during dumping and resist sag through repeated wet-grass loads.
For ongoing maintenance, plan to rinse fabric bags between mows and let them dry fully before storage. Latch straps should be inspected each spring, since rubber hardens after a winter in an unheated shed. A five dollar strap swap in March prevents a twenty dollar chute replacement in July.
Practical Notes Before You Order
Where Shoppers Go Wrong
The most common slip-up is matching by deck size alone. A 42 inch Craftsman and a 42 inch Husqvarna can use different bagger geometries even though the deck width matches. Always confirm the OEM part number on the existing bag or in the operator’s manual before clicking through.
Another trap is assuming OEM means the only option. For bag fabric, aftermarket equivalents often match OEM specs at a lower cost, while for latch hardware the OEM part is usually the safer pick because the strap compound is matched to the chute flex. Bag fabric, latch strap, full container, and chute assembly are four different categories with four different value equations.
When Paying More Pays Off
The upgrade that costs the most but earns its keep is moving from a fabric-only bag to a hard-bottom bag. You pay a small premium per bag, but the bottom panel keeps the bag’s shape, sheds clippings cleanly at the compost pile, and resists the sag that pulls fabric bags out of square.
The second tier upgrade is buying a multi-pack instead of a single bag. Spare bags on the shelf mean a torn seam during peak season does not stop the mow. For triple bagger frames, a three-pack is essentially insurance against the mid-summer failure that strands half your yard in clippings.